// This file was generated by gir (https://github.com/gtk-rs/gir)
// from
// from gir-files (https://github.com/gtk-rs/gir-files.git)
// DO NOT EDIT

use crate::ffi;
use glib::{
    prelude::*,
    signal::{connect_raw, SignalHandlerId},
    translate::*,
};
use std::boxed::Box as Box_;

glib::wrapper! {
    /// A scrollable [`Latch`][crate::Latch].
    ///
    /// `BisLatchScrollable` is a variant of [`Latch`][crate::Latch] that implements the
    /// [`gtk::Scrollable`][crate::gtk::Scrollable] interface.
    ///
    /// The primary use case for `BisLatchScrollable` is latching
    /// `Gtk::ListView`.
    ///
    /// ## Properties
    ///
    ///
    /// #### `child`
    ///  The child widget of the `BisLatchScrollable`.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `maximum-size`
    ///  The maximum size allocated to the child.
    ///
    /// It is the width if the latch is horizontal, or the height if it is vertical.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `tightening-threshold`
    ///  The size above which the child is latched.
    ///
    /// Starting from this size, the latch will tighten its grip on the child,
    /// slowly allocating less and less of the available size up to the maximum
    /// allocated size. Below that threshold and below the maximum width, the child
    /// will be allocated all the available size.
    ///
    /// If the threshold is greater than the maximum size to allocate to the child,
    /// the child will be allocated all the width up to the maximum.
    /// If the threshold is lower than the minimum size to allocate to the child,
    /// that size will be used as the tightening threshold.
    ///
    /// Effectively, tightening the grip on the child before it reaches its maximum
    /// size makes transitions to and from the maximum size smoother when resizing.
    ///
    /// Readable | Writeable
    /// <details><summary><h4>Widget</h4></summary>
    ///
    ///
    /// #### `can-focus`
    ///  Whether the widget or any of its descendents can accept
    /// the input focus.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `can-target`
    ///  Whether the widget can receive pointer events.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `css-classes`
    ///  A list of css classes applied to this widget.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `css-name`
    ///  The name of this widget in the CSS tree.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    ///
    /// Readable | Writeable | Construct Only
    ///
    ///
    /// #### `cursor`
    ///  The cursor used by @widget.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `focus-on-click`
    ///  Whether the widget should grab focus when it is clicked with the mouse.
    ///
    /// This property is only relevant for widgets that can take focus.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `focusable`
    ///  Whether this widget itself will accept the input focus.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `halign`
    ///  How to distribute horizontal space if widget gets extra space.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `has-default`
    ///  Whether the widget is the default widget.
    ///
    /// Readable
    ///
    ///
    /// #### `has-focus`
    ///  Whether the widget has the input focus.
    ///
    /// Readable
    ///
    ///
    /// #### `has-tooltip`
    ///  Enables or disables the emission of the ::query-tooltip signal on @widget.
    ///
    /// A value of [`true`] indicates that @widget can have a tooltip, in this case
    /// the widget will be queried using [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] to
    /// determine whether it will provide a tooltip or not.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `height-request`
    ///  Override for height request of the widget.
    ///
    /// If this is -1, the natural request will be used.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `hexpand`
    ///  Whether to expand horizontally.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `hexpand-set`
    ///  Whether to use the `hexpand` property.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `layout-manager`
    ///  The [`gtk::LayoutManager`][crate::gtk::LayoutManager] instance to use to compute the preferred size
    /// of the widget, and allocate its children.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-bottom`
    ///  Margin on bottom side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-end`
    ///  Margin on end of widget, horizontally.
    ///
    /// This property supports left-to-right and right-to-left text
    /// directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-start`
    ///  Margin on start of widget, horizontally.
    ///
    /// This property supports left-to-right and right-to-left text
    /// directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `margin-top`
    ///  Margin on top side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `name`
    ///  The name of the widget.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `opacity`
    ///  The requested opacity of the widget.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `overflow`
    ///  How content outside the widget's content area is treated.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `parent`
    ///  The parent widget of this widget.
    ///
    /// Readable
    ///
    ///
    /// #### `receives-default`
    ///  Whether the widget will receive the default action when it is focused.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `root`
    ///  The `GtkRoot` widget of the widget tree containing this widget.
    ///
    /// This will be [`None`] if the widget is not contained in a root widget.
    ///
    /// Readable
    ///
    ///
    /// #### `scale-factor`
    ///  The scale factor of the widget.
    ///
    /// Readable
    ///
    ///
    /// #### `sensitive`
    ///  Whether the widget responds to input.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `tooltip-markup`
    ///  Sets the text of tooltip to be the given string, which is marked up
    /// with Pango markup.
    ///
    /// Also see `Gtk::Tooltip::set_markup()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]:
    /// [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip] will automatically be set to [`true`]
    /// and there will be taken care of [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in
    /// the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and
    /// [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup] are set, the last one wins.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `tooltip-text`
    ///  Sets the text of tooltip to be the given string.
    ///
    /// Also see `Gtk::Tooltip::set_text()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]:
    /// [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip] will automatically be set to [`true`]
    /// and there will be taken care of [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in
    /// the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and
    /// [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup] are set, the last one wins.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `valign`
    ///  How to distribute vertical space if widget gets extra space.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `vexpand`
    ///  Whether to expand vertically.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `vexpand-set`
    ///  Whether to use the `vexpand` property.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `visible`
    ///  Whether the widget is visible.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `width-request`
    ///  Override for width request of the widget.
    ///
    /// If this is -1, the natural request will be used.
    ///
    /// Readable | Writeable
    /// </details>
    /// <details><summary><h4>Accessible</h4></summary>
    ///
    ///
    /// #### `accessible-role`
    ///  The accessible role of the given [`gtk::Accessible`][crate::gtk::Accessible] implementation.
    ///
    /// The accessible role cannot be changed once set.
    ///
    /// Readable | Writeable
    /// </details>
    /// <details><summary><h4>Orientable</h4></summary>
    ///
    ///
    /// #### `orientation`
    ///  The orientation of the orientable.
    ///
    /// Readable | Writeable
    /// </details>
    /// <details><summary><h4>Scrollable</h4></summary>
    ///
    ///
    /// #### `hadjustment`
    ///  Horizontal `GtkAdjustment` of the scrollable widget.
    ///
    /// This adjustment is shared between the scrollable widget and its parent.
    ///
    /// Readable | Writeable | Construct
    ///
    ///
    /// #### `hscroll-policy`
    ///  Determines when horizontal scrolling should start.
    ///
    /// Readable | Writeable
    ///
    ///
    /// #### `vadjustment`
    ///  Vertical `GtkAdjustment` of the scrollable widget.
    ///
    /// This adjustment is shared between the scrollable widget and its parent.
    ///
    /// Readable | Writeable | Construct
    ///
    ///
    /// #### `vscroll-policy`
    ///  Determines when vertical scrolling should start.
    ///
    /// Readable | Writeable
    /// </details>
    ///
    /// # Implements
    ///
    /// [`trait@gtk::prelude::WidgetExt`], [`trait@glib::ObjectExt`], [`trait@gtk::prelude::AccessibleExt`], [`trait@gtk::prelude::BuildableExt`], [`trait@gtk::prelude::ConstraintTargetExt`], [`trait@gtk::prelude::OrientableExt`], [`trait@gtk::prelude::ScrollableExt`]
    #[doc(alias = "BisLatchScrollable")]
    pub struct LatchScrollable(Object<ffi::BisLatchScrollable, ffi::BisLatchScrollableClass>) @extends gtk::Widget, @implements gtk::Accessible, gtk::Buildable, gtk::ConstraintTarget, gtk::Orientable, gtk::Scrollable;

    match fn {
        type_ => || ffi::bis_latch_scrollable_get_type(),
    }
}

impl LatchScrollable {
    /// Creates a new `BisLatchScrollable`.
    ///
    /// # Returns
    ///
    /// the newly created `BisLatchScrollable`
    #[doc(alias = "bis_latch_scrollable_new")]
    pub fn new() -> LatchScrollable {
        assert_initialized_main_thread!();
        unsafe { gtk::Widget::from_glib_none(ffi::bis_latch_scrollable_new()).unsafe_cast() }
    }

    // rustdoc-stripper-ignore-next
    /// Creates a new builder-pattern struct instance to construct [`LatchScrollable`] objects.
    ///
    /// This method returns an instance of [`LatchScrollableBuilder`](crate::builders::LatchScrollableBuilder) which can be used to create [`LatchScrollable`] objects.
    pub fn builder() -> LatchScrollableBuilder {
        LatchScrollableBuilder::new()
    }

    /// Gets the child widget of @self.
    ///
    /// # Returns
    ///
    /// the child widget of @self
    #[doc(alias = "bis_latch_scrollable_get_child")]
    #[doc(alias = "get_child")]
    pub fn child(&self) -> Option<gtk::Widget> {
        unsafe { from_glib_none(ffi::bis_latch_scrollable_get_child(self.to_glib_none().0)) }
    }

    /// Gets the maximum size allocated to the child.
    ///
    /// # Returns
    ///
    /// the maximum size to allocate to the child
    #[doc(alias = "bis_latch_scrollable_get_maximum_size")]
    #[doc(alias = "get_maximum_size")]
    #[doc(alias = "maximum-size")]
    pub fn maximum_size(&self) -> i32 {
        unsafe { ffi::bis_latch_scrollable_get_maximum_size(self.to_glib_none().0) }
    }

    /// Gets the size above which the child is latched.
    ///
    /// # Returns
    ///
    /// the size above which the child is latched
    #[doc(alias = "bis_latch_scrollable_get_tightening_threshold")]
    #[doc(alias = "get_tightening_threshold")]
    #[doc(alias = "tightening-threshold")]
    pub fn tightening_threshold(&self) -> i32 {
        unsafe { ffi::bis_latch_scrollable_get_tightening_threshold(self.to_glib_none().0) }
    }

    /// Sets the child widget of @self.
    /// ## `child`
    /// the child widget
    #[doc(alias = "bis_latch_scrollable_set_child")]
    #[doc(alias = "child")]
    pub fn set_child(&self, child: Option<&impl IsA<gtk::Widget>>) {
        unsafe {
            ffi::bis_latch_scrollable_set_child(
                self.to_glib_none().0,
                child.map(|p| p.as_ref()).to_glib_none().0,
            );
        }
    }

    /// Sets the maximum size allocated to the child.
    ///
    /// It is the width if the latch is horizontal, or the height if it is vertical.
    /// ## `maximum_size`
    /// the maximum size
    #[doc(alias = "bis_latch_scrollable_set_maximum_size")]
    #[doc(alias = "maximum-size")]
    pub fn set_maximum_size(&self, maximum_size: i32) {
        unsafe {
            ffi::bis_latch_scrollable_set_maximum_size(self.to_glib_none().0, maximum_size);
        }
    }

    /// Sets the size above which the child is latched.
    ///
    /// Starting from this size, the latch will tighten its grip on the child, slowly
    /// allocating less and less of the available size up to the maximum allocated
    /// size. Below that threshold and below the maximum width, the child will be
    /// allocated all the available size.
    ///
    /// If the threshold is greater than the maximum size to allocate to the child,
    /// the child will be allocated all the width up to the maximum. If the threshold
    /// is lower than the minimum size to allocate to the child, that size will be
    /// used as the tightening threshold.
    ///
    /// Effectively, tightening the grip on the child before it reaches its maximum
    /// size makes transitions to and from the maximum size smoother when resizing.
    /// ## `tightening_threshold`
    /// the tightening threshold
    #[doc(alias = "bis_latch_scrollable_set_tightening_threshold")]
    #[doc(alias = "tightening-threshold")]
    pub fn set_tightening_threshold(&self, tightening_threshold: i32) {
        unsafe {
            ffi::bis_latch_scrollable_set_tightening_threshold(
                self.to_glib_none().0,
                tightening_threshold,
            );
        }
    }

    #[doc(alias = "child")]
    pub fn connect_child_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn notify_child_trampoline<F: Fn(&LatchScrollable) + 'static>(
            this: *mut ffi::BisLatchScrollable,
            _param_spec: glib::ffi::gpointer,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"notify::child\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    notify_child_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    #[doc(alias = "maximum-size")]
    pub fn connect_maximum_size_notify<F: Fn(&Self) + 'static>(&self, f: F) -> SignalHandlerId {
        unsafe extern "C" fn notify_maximum_size_trampoline<F: Fn(&LatchScrollable) + 'static>(
            this: *mut ffi::BisLatchScrollable,
            _param_spec: glib::ffi::gpointer,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"notify::maximum-size\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    notify_maximum_size_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }

    #[doc(alias = "tightening-threshold")]
    pub fn connect_tightening_threshold_notify<F: Fn(&Self) + 'static>(
        &self,
        f: F,
    ) -> SignalHandlerId {
        unsafe extern "C" fn notify_tightening_threshold_trampoline<
            F: Fn(&LatchScrollable) + 'static,
        >(
            this: *mut ffi::BisLatchScrollable,
            _param_spec: glib::ffi::gpointer,
            f: glib::ffi::gpointer,
        ) {
            let f: &F = &*(f as *const F);
            f(&from_glib_borrow(this))
        }
        unsafe {
            let f: Box_<F> = Box_::new(f);
            connect_raw(
                self.as_ptr() as *mut _,
                b"notify::tightening-threshold\0".as_ptr() as *const _,
                Some(std::mem::transmute::<*const (), unsafe extern "C" fn()>(
                    notify_tightening_threshold_trampoline::<F> as *const (),
                )),
                Box_::into_raw(f),
            )
        }
    }
}

impl Default for LatchScrollable {
    fn default() -> Self {
        Self::new()
    }
}

// rustdoc-stripper-ignore-next
/// A [builder-pattern] type to construct [`LatchScrollable`] objects.
///
/// [builder-pattern]: https://doc.rust-lang.org/1.0.0/style/ownership/builders.html
#[must_use = "The builder must be built to be used"]
pub struct LatchScrollableBuilder {
    builder: glib::object::ObjectBuilder<'static, LatchScrollable>,
}

impl LatchScrollableBuilder {
    fn new() -> Self {
        Self {
            builder: glib::object::Object::builder(),
        }
    }

    /// The child widget of the `BisLatchScrollable`.
    pub fn child(self, child: &impl IsA<gtk::Widget>) -> Self {
        Self {
            builder: self.builder.property("child", child.clone().upcast()),
        }
    }

    /// The maximum size allocated to the child.
    ///
    /// It is the width if the latch is horizontal, or the height if it is vertical.
    pub fn maximum_size(self, maximum_size: i32) -> Self {
        Self {
            builder: self.builder.property("maximum-size", maximum_size),
        }
    }

    /// The size above which the child is latched.
    ///
    /// Starting from this size, the latch will tighten its grip on the child,
    /// slowly allocating less and less of the available size up to the maximum
    /// allocated size. Below that threshold and below the maximum width, the child
    /// will be allocated all the available size.
    ///
    /// If the threshold is greater than the maximum size to allocate to the child,
    /// the child will be allocated all the width up to the maximum.
    /// If the threshold is lower than the minimum size to allocate to the child,
    /// that size will be used as the tightening threshold.
    ///
    /// Effectively, tightening the grip on the child before it reaches its maximum
    /// size makes transitions to and from the maximum size smoother when resizing.
    pub fn tightening_threshold(self, tightening_threshold: i32) -> Self {
        Self {
            builder: self
                .builder
                .property("tightening-threshold", tightening_threshold),
        }
    }

    /// Whether the widget or any of its descendents can accept
    /// the input focus.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    pub fn can_focus(self, can_focus: bool) -> Self {
        Self {
            builder: self.builder.property("can-focus", can_focus),
        }
    }

    /// Whether the widget can receive pointer events.
    pub fn can_target(self, can_target: bool) -> Self {
        Self {
            builder: self.builder.property("can-target", can_target),
        }
    }

    /// A list of css classes applied to this widget.
    pub fn css_classes(self, css_classes: impl Into<glib::StrV>) -> Self {
        Self {
            builder: self.builder.property("css-classes", css_classes.into()),
        }
    }

    /// The name of this widget in the CSS tree.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    pub fn css_name(self, css_name: impl Into<glib::GString>) -> Self {
        Self {
            builder: self.builder.property("css-name", css_name.into()),
        }
    }

    //pub fn cursor(self, cursor: /*Ignored*/&gdk::Cursor) -> Self {
    //    Self { builder: self.builder.property("cursor", cursor), }
    //}

    /// Whether the widget should grab focus when it is clicked with the mouse.
    ///
    /// This property is only relevant for widgets that can take focus.
    pub fn focus_on_click(self, focus_on_click: bool) -> Self {
        Self {
            builder: self.builder.property("focus-on-click", focus_on_click),
        }
    }

    /// Whether this widget itself will accept the input focus.
    pub fn focusable(self, focusable: bool) -> Self {
        Self {
            builder: self.builder.property("focusable", focusable),
        }
    }

    //pub fn halign(self, halign: /*Ignored*/gtk::Align) -> Self {
    //    Self { builder: self.builder.property("halign", halign), }
    //}

    /// Enables or disables the emission of the ::query-tooltip signal on @widget.
    ///
    /// A value of [`true`] indicates that @widget can have a tooltip, in this case
    /// the widget will be queried using [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] to
    /// determine whether it will provide a tooltip or not.
    pub fn has_tooltip(self, has_tooltip: bool) -> Self {
        Self {
            builder: self.builder.property("has-tooltip", has_tooltip),
        }
    }

    /// Override for height request of the widget.
    ///
    /// If this is -1, the natural request will be used.
    pub fn height_request(self, height_request: i32) -> Self {
        Self {
            builder: self.builder.property("height-request", height_request),
        }
    }

    /// Whether to expand horizontally.
    pub fn hexpand(self, hexpand: bool) -> Self {
        Self {
            builder: self.builder.property("hexpand", hexpand),
        }
    }

    /// Whether to use the `hexpand` property.
    pub fn hexpand_set(self, hexpand_set: bool) -> Self {
        Self {
            builder: self.builder.property("hexpand-set", hexpand_set),
        }
    }

    /// The [`gtk::LayoutManager`][crate::gtk::LayoutManager] instance to use to compute the preferred size
    /// of the widget, and allocate its children.
    ///
    /// This property is meant to be set by widget implementations,
    /// typically in their instance init function.
    pub fn layout_manager(self, layout_manager: &impl IsA<gtk::LayoutManager>) -> Self {
        Self {
            builder: self
                .builder
                .property("layout-manager", layout_manager.clone().upcast()),
        }
    }

    /// Margin on bottom side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    pub fn margin_bottom(self, margin_bottom: i32) -> Self {
        Self {
            builder: self.builder.property("margin-bottom", margin_bottom),
        }
    }

    /// Margin on end of widget, horizontally.
    ///
    /// This property supports left-to-right and right-to-left text
    /// directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    pub fn margin_end(self, margin_end: i32) -> Self {
        Self {
            builder: self.builder.property("margin-end", margin_end),
        }
    }

    /// Margin on start of widget, horizontally.
    ///
    /// This property supports left-to-right and right-to-left text
    /// directions.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    pub fn margin_start(self, margin_start: i32) -> Self {
        Self {
            builder: self.builder.property("margin-start", margin_start),
        }
    }

    /// Margin on top side of widget.
    ///
    /// This property adds margin outside of the widget's normal size
    /// request, the margin will be added in addition to the size from
    /// [`WidgetExtManual::set_size_request()`][crate::gtk::prelude::WidgetExtManual::set_size_request()] for example.
    pub fn margin_top(self, margin_top: i32) -> Self {
        Self {
            builder: self.builder.property("margin-top", margin_top),
        }
    }

    /// The name of the widget.
    pub fn name(self, name: impl Into<glib::GString>) -> Self {
        Self {
            builder: self.builder.property("name", name.into()),
        }
    }

    /// The requested opacity of the widget.
    pub fn opacity(self, opacity: f64) -> Self {
        Self {
            builder: self.builder.property("opacity", opacity),
        }
    }

    //pub fn overflow(self, overflow: /*Ignored*/gtk::Overflow) -> Self {
    //    Self { builder: self.builder.property("overflow", overflow), }
    //}

    /// Whether the widget will receive the default action when it is focused.
    pub fn receives_default(self, receives_default: bool) -> Self {
        Self {
            builder: self.builder.property("receives-default", receives_default),
        }
    }

    /// Whether the widget responds to input.
    pub fn sensitive(self, sensitive: bool) -> Self {
        Self {
            builder: self.builder.property("sensitive", sensitive),
        }
    }

    /// Sets the text of tooltip to be the given string, which is marked up
    /// with Pango markup.
    ///
    /// Also see `Gtk::Tooltip::set_markup()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]:
    /// [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip] will automatically be set to [`true`]
    /// and there will be taken care of [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in
    /// the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and
    /// [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup] are set, the last one wins.
    pub fn tooltip_markup(self, tooltip_markup: impl Into<glib::GString>) -> Self {
        Self {
            builder: self
                .builder
                .property("tooltip-markup", tooltip_markup.into()),
        }
    }

    /// Sets the text of tooltip to be the given string.
    ///
    /// Also see `Gtk::Tooltip::set_text()`.
    ///
    /// This is a convenience property which will take care of getting the
    /// tooltip shown if the given string is not [`None`]:
    /// [`has-tooltip`][struct@crate::gtk::Widget#has-tooltip] will automatically be set to [`true`]
    /// and there will be taken care of [`query-tooltip`][struct@crate::gtk::Widget#query-tooltip] in
    /// the default signal handler.
    ///
    /// Note that if both [`tooltip-text`][struct@crate::gtk::Widget#tooltip-text] and
    /// [`tooltip-markup`][struct@crate::gtk::Widget#tooltip-markup] are set, the last one wins.
    pub fn tooltip_text(self, tooltip_text: impl Into<glib::GString>) -> Self {
        Self {
            builder: self.builder.property("tooltip-text", tooltip_text.into()),
        }
    }

    //pub fn valign(self, valign: /*Ignored*/gtk::Align) -> Self {
    //    Self { builder: self.builder.property("valign", valign), }
    //}

    /// Whether to expand vertically.
    pub fn vexpand(self, vexpand: bool) -> Self {
        Self {
            builder: self.builder.property("vexpand", vexpand),
        }
    }

    /// Whether to use the `vexpand` property.
    pub fn vexpand_set(self, vexpand_set: bool) -> Self {
        Self {
            builder: self.builder.property("vexpand-set", vexpand_set),
        }
    }

    /// Whether the widget is visible.
    pub fn visible(self, visible: bool) -> Self {
        Self {
            builder: self.builder.property("visible", visible),
        }
    }

    /// Override for width request of the widget.
    ///
    /// If this is -1, the natural request will be used.
    pub fn width_request(self, width_request: i32) -> Self {
        Self {
            builder: self.builder.property("width-request", width_request),
        }
    }

    //pub fn accessible_role(self, accessible_role: /*Ignored*/gtk::AccessibleRole) -> Self {
    //    Self { builder: self.builder.property("accessible-role", accessible_role), }
    //}

    //pub fn orientation(self, orientation: /*Ignored*/gtk::Orientation) -> Self {
    //    Self { builder: self.builder.property("orientation", orientation), }
    //}

    //pub fn hadjustment(self, hadjustment: &impl IsA</*Ignored*/gtk::Adjustment>) -> Self {
    //    Self { builder: self.builder.property("hadjustment", hadjustment.clone().upcast()), }
    //}

    //pub fn hscroll_policy(self, hscroll_policy: /*Ignored*/gtk::ScrollablePolicy) -> Self {
    //    Self { builder: self.builder.property("hscroll-policy", hscroll_policy), }
    //}

    //pub fn vadjustment(self, vadjustment: &impl IsA</*Ignored*/gtk::Adjustment>) -> Self {
    //    Self { builder: self.builder.property("vadjustment", vadjustment.clone().upcast()), }
    //}

    //pub fn vscroll_policy(self, vscroll_policy: /*Ignored*/gtk::ScrollablePolicy) -> Self {
    //    Self { builder: self.builder.property("vscroll-policy", vscroll_policy), }
    //}

    // rustdoc-stripper-ignore-next
    /// Build the [`LatchScrollable`].
    #[must_use = "Building the object from the builder is usually expensive and is not expected to have side effects"]
    pub fn build(self) -> LatchScrollable {
        self.builder.build()
    }
}