Struct libbismuth :: LatchScrollable Copy item path

impl LatchScrollable

pub fn new() -> LatchScrollable

Creates a new BisLatchScrollable.

§Returns

the newly created BisLatchScrollable

pub fn builder() -> LatchScrollableBuilder

Creates a new builder-pattern struct instance to construct LatchScrollable objects.

This method returns an instance of LatchScrollableBuilder which can be used to create LatchScrollable objects.

pub fn child(&self) -> Option<Widget>

Gets the child widget of @self.

§Returns

the child widget of @self

pub fn maximum_size(&self) -> i32

Gets the maximum size allocated to the child.

§Returns

the maximum size to allocate to the child

pub fn tightening_threshold(&self) -> i32

Gets the size above which the child is latched.

§Returns

the size above which the child is latched

pub fn set_child(&self, child: Option<&impl IsA<Widget>>)

Sets the child widget of @self.

§`child`

the child widget

pub fn set_maximum_size(&self, maximum_size: i32)

Sets the maximum size allocated to the child.

It is the width if the latch is horizontal, or the height if it is vertical.

§`maximum_size`

the maximum size

pub fn set_tightening_threshold(&self, tightening_threshold: i32)

Sets the size above which the child is latched.

Starting from this size, the latch will tighten its grip on the child, slowly allocating less and less of the available size up to the maximum allocated size. Below that threshold and below the maximum width, the child will be allocated all the available size.

If the threshold is greater than the maximum size to allocate to the child, the child will be allocated all the width up to the maximum. If the threshold is lower than the minimum size to allocate to the child, that size will be used as the tightening threshold.

Effectively, tightening the grip on the child before it reaches its maximum size makes transitions to and from the maximum size smoother when resizing.

§`tightening_threshold`

the tightening threshold

pub fn connect_child_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_maximum_size_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

pub fn connect_tightening_threshold_notify<F: Fn(&Self) + 'static>( &self, f: F, ) -> SignalHandlerId

Trait Implementations§

impl Clone for LatchScrollable

fn clone(&self) -> Self

Makes a clone of this shared reference.

This increments the strong reference count of the object. Dropping the object will decrement it again.

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for LatchScrollable

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for LatchScrollable

fn default() -> Self

Returns the “default value” for a type. Read more

impl HasParamSpec for LatchScrollable

type ParamSpec = ParamSpecObject

type SetValue = LatchScrollable

Preferred value to be used as setter for the associated ParamSpec.

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Hashes the memory address of this object.

1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more

impl Ord for LatchScrollable

fn cmp(&self, other: &Self) -> Ordering

Comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more

1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more

1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more

impl ParentClassIs for LatchScrollable

type Parent = Widget

impl<OT: ObjectType> PartialEq<OT> for LatchScrollable

fn eq(&self, other: &OT) -> bool

Equality for two GObjects.

Two GObjects are equal if their memory addresses are equal.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<OT: ObjectType> PartialOrd<OT> for LatchScrollable

fn partial_cmp(&self, other: &OT) -> Option<Ordering>

Partial comparison for two GObjects.

Compares the memory addresses of the provided objects.

1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more

1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more

1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

impl StaticType for LatchScrollable

fn static_type() -> Type

Returns the type identifier of Self.

impl Eq for LatchScrollable

impl IsA<Accessible> for LatchScrollable

impl IsA<Buildable> for LatchScrollable

impl IsA<ConstraintTarget> for LatchScrollable

impl IsA<Orientable> for LatchScrollable

impl IsA<Scrollable> for LatchScrollable

impl IsA<Widget> for LatchScrollable

Auto Trait Implementations§

impl Freeze for LatchScrollable

impl RefUnwindSafe for LatchScrollable

impl !Send for LatchScrollable

impl !Sync for LatchScrollable

impl Unpin for LatchScrollable

impl UnwindSafe for LatchScrollable

Blanket Implementations§

impl<O> AccessibleExt for O
where O: IsA<Accessible>,

fn accessible_role(&self) -> AccessibleRole

fn reset_property(&self, property: AccessibleProperty)

fn reset_relation(&self, relation: AccessibleRelation)

fn reset_state(&self, state: AccessibleState)

fn set_accessible_role(&self, accessible_role: AccessibleRole)

fn connect_accessible_role_notify<F>(&self, f: F) -> SignalHandlerId
where F: Fn(&Self) + 'static,

impl<O> AccessibleExtManual for O
where O: IsA<Accessible>,

fn update_property(&self, properties: &[Property<'_>])

fn update_relation(&self, relations: &[Relation<'_>])

fn update_state(&self, states: &[State])

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<O> BuildableExt for O
where O: IsA<Buildable>,

fn buildable_id(&self) -> Option<GString>

impl<T> Cast for T
where T: ObjectType,

fn upcast<T>(self) -> T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a superclass or interface T. Read more

fn upcast_ref<T>(&self) -> &T
where T: ObjectType, Self: IsA<T>,

Upcasts an object to a reference of its superclass or interface T. Read more

fn downcast<T>(self) -> Result<T, Self>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a subclass or interface implementor T. Read more

fn downcast_ref<T>(&self) -> Option<&T>
where T: ObjectType, Self: MayDowncastTo<T>,

Tries to downcast to a reference of its subclass or interface implementor T. Read more

fn dynamic_cast<T>(self) -> Result<T, Self>
where T: ObjectType,

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while upcast will do many checks at compile-time already. downcast will perform the same checks at runtime as dynamic_cast, but will also ensure some amount of compile-time safety. Read more

fn dynamic_cast_ref<T>(&self) -> Option<&T>
where T: ObjectType,

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

unsafe fn unsafe_cast<T>(self) -> T
where T: ObjectType,

Casts to T unconditionally. Read more

unsafe fn unsafe_cast_ref<T>(&self) -> &T
where T: ObjectType,

Casts to &T unconditionally. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(_: *const GList, _: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GList, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GPtrArray, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec( _: *const GPtrArray, _: usize, ) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GPtrArray, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *const GSList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(_: *const GSList, _: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GList, num: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec( ptr: *mut GPtrArray, num: usize, ) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GPtrArray, num: usize) -> Vec<T>

impl<T> FromGlibContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

unsafe fn from_glib_container_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

unsafe fn from_glib_full_num_as_vec(ptr: *mut GSList, num: usize) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GList) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GList) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GPtrArray) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GPtrArray) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GPtrArray) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *const GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *const GSList) -> Vec<T>

unsafe fn from_glib_container_as_vec(_: *const GSList) -> Vec<T>

unsafe fn from_glib_full_as_vec(_: *const GSList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GList) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GList) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GList) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GPtrArray> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GPtrArray) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GPtrArray) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GPtrArray) -> Vec<T>

impl<T> FromGlibPtrArrayContainerAsVec<<T as GlibPtrDefault>::GlibType, *mut GSList> for T
where T: GlibPtrDefault + FromGlibPtrNone<<T as GlibPtrDefault>::GlibType> + FromGlibPtrFull<<T as GlibPtrDefault>::GlibType>,

unsafe fn from_glib_none_as_vec(ptr: *mut GSList) -> Vec<T>

unsafe fn from_glib_container_as_vec(ptr: *mut GSList) -> Vec<T>

unsafe fn from_glib_full_as_vec(ptr: *mut GSList) -> Vec<T>

impl<O> GObjectPropertyExpressionExt for O
where O: IsA<Object>,

fn property_expression(&self, property_name: &str) -> PropertyExpression

Create an expression looking up an object’s property.

fn property_expression_weak(&self, property_name: &str) -> PropertyExpression

Create an expression looking up an object’s property with a weak reference.

fn this_expression(property_name: &str) -> PropertyExpression

Create an expression looking up a property in the bound this object.

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoClosureReturnValue for T
where T: Into<Value>,

fn into_closure_return_value(self) -> Option<Value>

impl IsSubclassableExt for U
where U: IsClass + ParentClassIs,

fn parent_class_init<T>(class: &mut Class)
where T: ObjectSubclass, ::Parent: IsSubclassable<T>,

fn parent_instance_init<T>(instance: &mut InitializingObject<T>)
where T: ObjectSubclass, ::Parent: IsSubclassable<T>,

impl<T> ObjectExt for T
where T: ObjectType,

fn is(&self) -> bool
where U: StaticType,

Returns true if the object is an instance of (can be cast to) T.

fn type_(&self) -> Type

Returns the type of the object.

fn object_class(&self) -> &Class<Object>

Returns the [ObjectClass] of the object. Read more

fn class(&self) -> &Class<T>
where T: IsClass,

Returns the class of the object.

fn class_of(&self) -> Option<&Class>
where U: IsClass,

Returns the class of the object in the given type T. Read more

fn interface(&self) -> Option<InterfaceRef<'_, U>>
where U: IsInterface,

Returns the interface T of the object. Read more

fn set_property(&self, property_name: &str, value: impl Into<Value>)

Sets the property property_name of the object to value value. Read more

fn set_property_from_value(&self, property_name: &str, value: &Value)

Sets the property property_name of the object to value value. Read more

fn set_properties(&self, property_values: &[(&str, &dyn ToValue)])

Sets multiple properties of the object at once. Read more

fn set_properties_from_value(&self, property_values: &[(&str, Value)])

Sets multiple properties of the object at once. Read more

fn property<V>(&self, property_name: &str) -> V
where V: for<'b> FromValue<'b> + 'static,

Gets the property property_name of the object and cast it to the type V. Read more

fn property_value(&self, property_name: &str) -> Value

Gets the property property_name of the object. Read more

fn has_property(&self, property_name: &str, type_: Option<Type>) -> bool

Check if the object has a property property_name of the given type_. Read more

fn property_type(&self, property_name: &str) -> Option<Type>

Get the type of the property property_name of this object. Read more

fn find_property(&self, property_name: &str) -> Option<ParamSpec>

Get the ParamSpec of the property property_name of this object.

fn list_properties(&self) -> PtrSlice<ParamSpec>

Return all ParamSpec of the properties of this object.

fn freeze_notify(&self) -> PropertyNotificationFreezeGuard

Freeze all property notifications until the return guard object is dropped. Read more

unsafe fn set_qdata<QD>(&self, key: Quark, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more

unsafe fn qdata<QD>(&self, key: Quark) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more

unsafe fn steal_qdata<QD>(&self, key: Quark) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more

unsafe fn set_data<QD>(&self, key: &str, value: QD)
where QD: 'static,

Set arbitrary data on this object with the given key. Read more

unsafe fn data<QD>(&self, key: &str) -> Option<NonNull<QD>>
where QD: 'static,

Return previously set arbitrary data of this object with the given key. Read more

unsafe fn steal_data<QD>(&self, key: &str) -> Option<QD>
where QD: 'static,

Retrieve previously set arbitrary data of this object with the given key. Read more

fn block_signal(&self, handler_id: &SignalHandlerId)

Block a given signal handler. Read more

fn unblock_signal(&self, handler_id: &SignalHandlerId)

Unblock a given signal handler.

fn stop_signal_emission(&self, signal_id: SignalId, detail: Option<Quark>)

Stop emission of the currently emitted signal.

fn stop_signal_emission_by_name(&self, signal_name: &str)

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

fn connect<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_name on this object. Read more

fn connect_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + Send + Sync + 'static,

Connect to the signal signal_id on this object. Read more

fn connect_local<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_name on this object. Read more

fn connect_local_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value> + 'static,

Connect to the signal signal_id on this object. Read more

unsafe fn connect_unsafe<F>( &self, signal_name: &str, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_name on this object. Read more

unsafe fn connect_unsafe_id<F>( &self, signal_id: SignalId, details: Option<Quark>, after: bool, callback: F, ) -> SignalHandlerId
where F: Fn(&[Value]) -> Option<Value>,

Connect to the signal signal_id on this object. Read more

fn connect_closure( &self, signal_name: &str, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_name on this object. Read more

fn connect_closure_id( &self, signal_id: SignalId, details: Option<Quark>, after: bool, closure: RustClosure, ) -> SignalHandlerId

Connect a closure to the signal signal_id on this object. Read more

fn watch_closure(&self, closure: &impl AsRef<Closure>)

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to invoke_with_values, or invoke when using Rust closures.